#G5 Wont Recognize Usb For Boot Full Information In#

It took me a couple weeks of research, asking questions of our Linux on PowerPC Macs group on Facebook, and experimenting before I could finally boot into Linux 14.04 from a thumb drive. Step 4: Select a name for the USB drive and click on the 'Erase' tab located at the lower bottom of the screen.ItвЂ™s not particularly easy to create a bootable USB flash drive so you can try running Linux on a PowerPC Mac. Step 3: Now, choose a format option that is compatible with Mac OS. Step 2: On the right side of the panel, you will see an 'Erase' tab. Step 1: Select the 'USB drive' option.

Then drag the appropriate partition (in my case, the USB external drive) to the destination field. All variants iMac G4 wont recognize lunux based disks.Select the Restore tab of Disc Utility and drag the Disk Image (or the DVD in case you have an external drive) for the Installation Media onto the Source field. Ubuntu Driver Issue, Single boot mac ubuntu.

Everything was handled through the command line in the late 1990s. Back in the olden days, Linux was a text-based operating system similar to MS-DOS. 7.IвЂ™ve experimented with Linux and BSD Macs going back to the Mac IIci era, and IвЂ™ve never had much luck.

G5 Wont Recognize Usb For Boot Full Information In

ItвЂ™s my most powerful PowerPC Mac, so I figured it would be a good way to take Linux for a spin. Two beeps, fans, white LED blinks twice between pauses You can find full information in the appropriate PowerMac G5 manual.My original testbed was a Late 2005 2.3 GHz Power Mac G5 Dual with 3 GB of RAM and two hard drives, one with OS X 10.4 Tiger, the other with OS X 10.5 Leopard. Something like: boot-device ud:3,:tbxi hd:,:tbxi' Type mac-boot and cross your fingers.If only IвЂ™d had a blank CD-R or DVD-R, it would have been a lot easier!Question Q Mac PPC G5 wont boot. Type printenv boot-device, and you should see the change displayed already. You should get an ok back. If it does boot from the DVD-ROM, you see a Welcome screen.Type setenv boot-device ud:3,:tbxi where the number after the colon corresponds to that partition number we found in step two.

The only PowerPC Macs that can use a 64-bit operating system are G5 iMacs and Power Macs. You can download 14.04 and 16.04 from this page, earlier versions from this page, where you can also get version 12.04 for PowerPC, among many other architectures.PowerPC distros prior to version 12.04 have separate 32-bit and 64-bit installers. ThatвЂ™s also the latest version available for PowerPC at present. Version 14.04 was released in the 4th month of 2014, and 16.04 in the 4th month of 2016. Lubuntu is known for having a lighter-weight user interface, LXDE вЂ“ similar to what Simon Royal used when he put LXLE on an old PC.Ubuntu Linux has a simple numbering scheme for its versions. After talking with others in our small-but-growing Linux PPC Facebook group, I settled on Lubuntu as a good starting point.

Using a USB Flash Drive was an exercise in frustration. ThatвЂ™s fine if you have blank CD-R media or a CD-RW disc, but I havenвЂ™t burnt a CD in years and have no blanks at present.That was also the biggest reason I had problems. Starting with version 12.04 the 32-bit and 64-bit versions are part of the same package for Macs.I suggest you start by downloading Mac (PowerPC) and IBM-PPC (POWER5) desktop CD, which is designed to be burnt to a CD-R and give you a fully bootable way to test out Linux before you commit to it.

Formatting the flash drive was the easy part installing the ISO and creating a bootable system stumped me.The only method I found that worked for creating a bootable USB flash drive with Lubuntu on it required me to use Etcher, a freeware app that takes an ISO and creates a bootable flash drive from it. I would spend hours trying this, that, and the other thing. And none of them worked on my Power Mac G5.

Etcher dutifully imaged the ISO file to the flash drive. I had to use one of my Macs with OS X 10.11 El Capitan installed, and that did the job.In other words, you need a fairly modern Mac to create the bootable flash drive you need to launch Linux on PowerPC Macs.I formatted the flash drive as FAT, exFAT, HFS+, Apple Partition Map, GUID Partition Map, and Master Boot Record. Nor does it run on my Intel Macs with OS X 10.6 Snow Leopard.

Start your Mac, hold down the C key, and it will boot from whatever is in your optical drive. But It WonвЂ™t BootIвЂ™ve been a spoiled Mac user since 1986, and if IвЂ™d had a CD-R or DVD-R, this would have been easy. Those are not the default settings, so youвЂ™ll have to find them in your version of Disk Utility.

I couldnвЂ™t boot from it in the traditional way. But no matter what I did, the USB thumb drive never showed up as an option. On my Power Mac G5, the options are OS X 10.4.11 Tiger, 10.4.11 Tiger Server, and 10.5.8 Leopard.If IвЂ™d had an external USB or FireWire drive, it would have shown up as well. ItвЂ™s easy, but thereвЂ™s nothing nearly as easy for booting from a USB flash drive.On most Macs, if you hold down the Option key (marked Opt on some Mac keyboards, Alt on Windows keyboard) at startup, your Mac will present you with all the bootable options on your computer.

That can take a while, as OF tests all your system memory every time you launch it. OF is a low-level operating system with a command line interface, like the Apple II+ at work that was the first computer I used, the Commodore VIC-20 and 64 that I used at home because they fit my low-end budget, and that Zenith Z-151 PC running MS-DOS 3.3 circa 1987.Launch OF. Your modern Mac be in Open Firmware (OF, as in two of the keys you hold down to boot into it). Hold down Cmd, Opt, O, and F at startup and hold them down until text appears on the upper left corner of your display.

I really appreciate the concise, thorough, helpful explanations of what each choice means. That would have been easy on the Dual, but I didnвЂ™t want to reformat either of its hard drives, so I went through my small collection of older Power Mac G5 models in search of one that would boot from the flash drive so I could easily reformat its hard drive and install Lubuntu.When I finally got one up and running вЂ“ the third one I tried (the first one wouldnвЂ™t even boot, the second wouldnвЂ™t boot from the flash drive) вЂ“ I started the installer. This was an exercise in frustration! Making a Bootable Linux Hard DriveOnce I saw that Lubuntu ran decently on my ancient Power Mac G5 Dual, I knew that I wanted to install it on a hard drive so it would boot more quickly and allow me to add more software. The other three I tried simply would not boot from the flash drive. In the end I found the command that let me boot from the front USB port on my older Power Mac G5 вЂ“ these are all equivalent:Boot that only worked on one of my Power Mac G5s. That worked perfectly with my Late 2005 Power Mac G5, but it would not work with my older 2.0 GHz dual-processor Power Mac G5s no matter what I did, and I didnвЂ™t bother to try it on an iMac G5.If you have more than one bootable device, type devalias at the prompt, hit Return, and you will see a lengthy list of devices like this.That was a bit of a rabbit trail for me.

If you want to try Linux on a PowerPC Mac, choose the 16.04 Long Term Release (LTR) version and be done with big upgrades until the next LTR version, probably in April 2018.If youвЂ™re just experimenting, you might want to use Lubuntu 17.04. How can I remove 35.6 M of files when I donвЂ™t even know whatвЂ™s necessary?Okay, I should have just started with the Lubuntu 16.04 ISO, but I didnвЂ™t know it at the time. Then it wanted to upgrade from 14.04 to 16.04, but every time I tried to do that, it nattered at me about removing certain files using sudo and compressing other files вЂ“ neither of which I am able to do. Ubuntu knows that we are interested in making informed decisions and that it needs to educate us through the process.

I wouldnвЂ™t want to use a Power Mac below 800 MHz or so with Tiger or Leopard, but dual 733 MHz or faster CPUs work well enough. This is lustworthy hardware, although not especially practical in terms of the current it draws.Dual-processor and dual-core Power Mac G5s are competent performers, and the faster dual-processor Power Mac G4 machines are solid workhorses as well with decent amounts of power. With four cores running at 2.5 GHz, youвЂ™ve got comparable power to the earliest 4-core Mac Pro.

Mac G5 Wont Recognize Usb For Boot